Epson 2116213-00 / A221E Photo Printer AC Power Adapter 24V 1.1A
Epson 2116213-00 / A221E Photo Printer AC Power Adapter 24V 1.1A
P/N: 2116213-00
Model: A221E
In good condition and In full working order
Supplied with mains power cable
Included:
- 1 x Epson 2116213-00 / A221E Photo Printer AC Power Adapter 24V 1.1A
More Info:
Specifications
24V Ac adapter for Epson 2116213-00 A221E
1.Input:110V-240V
2.Output:24V 1.1A
3.For:Photo Printer
4.Protection:OVP,SCP,OL
24V Ac adapter for Epson 2116213-00 A221E
Application: Epson photo printer
1.24V 1.1A Power adapter Characteristics
1.1 Input Characteristics:
- 1)Input Rated Voltage. Frequency 100-240V 50/60Hz
- 2) Input Voltage Range Continuously 90VAC to 264VAC
- 3) Input Frequency Range Continuously 50Hz to 60Hz Vibration Rate input frequency Continuously 47Hz to 63Hz
- 4) Input Current 100Vac in/2.0A load 1A Max.
- 5) Inrush Current: (Cold start) 30A Max .@100VAC cool start
- 60A Max .@230VAC cool start
- 6)No Load Power Consumption 100-240Vac in <1W
- 7) Leakage current: 10mA Max
1.2 Output Characteristics:
- 1)Output Characteristics: Measured at the end of DC cable
- 2)Output Rated Voltage No load 24V 22.8-25.2VDC
- 2.0A load 24V 22.8-25.2VDC
- 3)Output Current At constant voltage mode 0A to 1.1A
- 4) Output Voltage Ripple and Noise: 100-220Vac in/1.1A load <260mVp-p
- (0.1uF Ceramic Cap.and 50V 10uF Aluminum Cap. Paralleled between the end of output cable)
1.3 Protection Characteristics
- 1) Short Circuit Protection: The power adapter can withstand continuous short No broken, no smoke in at DC output and no damage, it will enter 30 Minutes into normal condition if the fault condition is removed.
- 2) Overshoot / Undershoot: 27V±5%
1.4 General characteristics
Efficiency
(Warm up) 100-240Vac in/2.0A load >70%
Switching Frequency
Switching Frequency
Protecioncondition
Any protect condition shall cause no damage and no component fail
Recovery
Automatic recovery when removal
1.5 Environmental Characteristics
ITEM CONDITION SPECIFICATION
Insulation Resistance
Between AC input and secondary applied 500Vdc >100M Ωfor 1 minute
Dielectric Strength
(Hi-Pot) Between AC input and secondary DC4242VDC, test No damage
time 1minute,and cut off current shall be less than
Temperature
Operating 0 to 40oC
Storage -20 to 60oC
Humidity
Operating 8%~95%
Storage 5%~95%
1.6 Technical Specifications:
1 AC input voltage ……100-240VAC (Worldwide)
2 Input frequency ………50-60Hz
3 Smart device surge protection for over voltage, temperature and short circuit protection
4 Strong built for heavy duty and long usage performance
5 Output stroom (max): 1.1A
6 Output voltage: 24 V
1.7 Detailed Information:
Name
Compatible AC Adapter For EPSON 221E 2116213-00 C Power Supply (24V 1.1A )
SKU
ADP-2116213-00
Voltage
24
Amperé
1.1
Connector
No
Partnumber
2116213-00
2.Reliability
- 1)Heat-resistance: The power adapter shall be stored at a temperature of 55 /-2 °C for 16 hours. Then No distortion and
(Storage) it shall be subjected to standard astrospheres conditions for 2 hours,
- 2)Heat resistance: The power adapter shall be placed at a temperature of 25 /-2 °C and operating at No abnormity
(Operation) full load for 4 hours. Measurement shall be made.
- (3)Cold-resistance: The power adapter shall be stored at a temperature of -20 /-2 °C for 16 hours. No distortion and
- (Storage) Then it shall be subjected to standard astrospheres conditions for 2 hour, No functionerror
after which measurement shall be made.
- 4)Cold-resistance: The SMPS shall be placed at a temperature of 0 /-2 °C and operating at No abnormity
(Operation) rate75% full load for 4 hours. Measurement shall be made.
- 5)Body surface temp: at a entironment temperature of 23 /-2 °C , 100VAC/2.0A load ≤65°C
For 2 hours, measure central section of sueface (thermoelectric couple method)
- 6) M.T.B.F: 50K Hours At 25°C With 80% Loading No abnormity
- 7) Life : Average Life Expectancy Or 3 Years
Fast Shipping Within 24 hours, - International Delivery is with UPS
Any Questions? Please email us.
AJ 127593 (I/B 127581)
All orders ship to worldwide.
